Ajax machine Serial Numbers are generally located on a nameplate on the front, left side of the machine with the exception of the Wire Drawers which tended to have nameplate on the Operator’s side towards the back (exit end) of the machine. Some machines will also have serial number on the control panels.

CECO (Chambersburg) machine Serial Numbers can be located by finding your specific machine’s parts sheet in our “Parts” tab and the Serial Number location is noted (typically on the front center and the bottom right side of the machine).

Machine manuals can be purchased by submitting a Purchase Order and providing the machine’s Serial Number to our Sales department who will then generate either a digital or hard copy manual which includes the operator’s manual, maintenance manual, parts sheet drawings, general assembly drawings, etc. The price of a manual ($500) includes a Certificate redeemable for $500 off of the next parts purchase for this machine. [Minimum order of $1,000 or more and must be placed within 90 days of receipt of the parts manual.] Please allow two weeks for delivery.

Click here to visit our Parts page and locate your machine type and the Parts Sheets that matches as close to your machine as any other. This sheet will indicate the part numbers you may choose to order.

Absolutely. Please contact a member of our Sales Team and we can send you our Service Rates as well as help you schedule Service at your location.

Any member of our Sales Team would be happy to discuss the options that our Stocking Program can offer for just such a need.

We specialize in Forging Presses and Hammers in various sizes, capabilities and options, and are excited to offer hydraulic versions as well. We can also assist you with any engineering, automation or material handling you may desire.

Absolutely. Please visit our service page for examples of current and past projects.

Repair: On site or shipped to our manufacturing facility which reduces the expenses. Ajax-CECO will minimally disassemble, inspect, report and suggest REPAIR: replace only components that are damaged, causing the machine not to function properly or that pose an unsafe condition, and bring it to working condition. Every effort will be made to re-use parts; however, it may be necessary to repair or replace parts. All repairs made at Ajax-CECO will be charged at the price of labor and materials . Frames, components and guards will not be repainted .

Rebuild: On site or shipped to our manufacturing facility which reduces the expenses. Ajax-CECO will completely disassemble, clean and inspect the machine to be supplied by the Customer. Upon completion of the inspection, Ajax-CECO will submit our report of findings to the Customer. This report will include:

1. A list of missing components, compared to the “as-built” Bill of Material.

2. Findings of concern to Ajax-CECO that would impact the operation of the machine if it were to be re-commissioned.

3. Description and pictures of the general condition of the parts.

4. Based on the inspection findings, Ajax-CECO and the Customer will develop a general scope of work aimed at a REBUILD of the machine, and re-commissioning the machine.

5. Every effort will be made to re-use parts. It might be necessary to repair or replace additional parts not listed in the proposal. Any changes to the scope suggested by Ajax-CECO must be approved by the Customer prior to proceeding with any additional work.

6. A price estimate, based on time and materials to REBUILD the machine and re-commission will be provided. Frames, components and guards will not be re-painted.

Remanufacture: Brings the Customer’s machines back to OEM like-new condition. Machine is sent to our manufacturing facility.

1. Remove and discard all internal components of machine tool.

2. Inspect and repair any damage to frame.

3. Machine all working surfaces.

4. Manufacture all new internal components to bring the machine to complete, original factory specifications. (Basically a new machine with exception of the frame).

We do not stock used machines for re-sale, however, our outside Sales Team may sometimes hear of machines offered for sale by owners and would be happy to connect you. We would be happy to provide a quote for the repair, rebuild or remanufacture of any machine you purchase.

Our experienced Service Technicians would be more than happy to install any parts you purchase.

Absolutely. We can provide one of our knowledgeable Service Technicians to assist your team in the installation or repair of your machine.

Yes we do. We have Tier 1 Vendors as well as other members of the Park Ohio Forging group that we use to manufacture certain parts. We would be more than happy to discuss your options.

The history of Ajax-CECO is embedded in our extensive library of OEM parts since 1875. We consider our prints and drawings proprietary in nature and are not able to share those publicly. We do, however, work with you in determining the exact part needed for your machine and will work with you on any expediting you may require if at all possible.

Yes. We can provide crating, rigging, transportation to and from your facility and complete installation and run-off on your site.

Park Ohio
FIERF Forging Foundation
Forging Industry Association